Always pay attention to check the multi-function glass cutting machine, why do you say this?
Because of the continuous improvement of living standards, various machines are relatively popular in the market. Of course, the multi-functional glass cutting machine is also one of them. The appearance of the multi-functional glass cutting machine can be said to have brought us a lot of convenience.
1. Before cutting, check the appearance of the cut glass without white spots and scratches.
2. Before starting the machine, check whether there is air leakage in the pipeline of the machine. Never start the machine if there is air leakage.
3. After starting the machine, check whether there are obstacles on the working surface and guide rails. If there are obstacles, they must be removed.
4. After the first piece is confirmed to be qualified, it can be mass-produced (the first row of horizontal and vertical is used as the measurement object for full inspection when necessary).
5. Before lifting the glass, it must be confirmed that the glass to be lifted has no cracks, so as to avoid the phenomenon of automatic separation of the glass when lifting.
6. Automatic layout optimization function: On the edge of the cutting machine, considering the particularity of the processing cost and the type of piece-breaking work, generally highly educated people are not arranged to do it, which requires the operation of the cutting machine to be simple and easy to understand. It can't be too complicated, otherwise, it will cause an embarrassing situation where you can't afford a machine and can't keep it.
7. A good glass-cutting machine can avoid defects because there are sometimes defective products in the domestic bottom glass.
8. The graphics library for special-shaped cutting should be more and more flexible, and the graphics made by CAD should also participate in the typesetting development.
9. Close all air valves before shutting down, and release the remaining gas in the air circuit.
10. If any abnormal phenomenon is found, the power should be cut off immediately.
11. Record the failure phenomenon of the machine.